网站关键词:
当前所在位置:首页>>beplay体育备用山东铜门:铜门损坏应该怎么办? beplay体育备用

山东铜门:铜门损坏应该怎么办?

来源: //www.doveish.com日期:2024-05-15 发布人:创始人浏览次数: 0

  随着人们是生活水平不断的提高。铜门的需求也不断的加大,铜门的实用性能可靠,外观美,压缩能力强。那么在铜门出现损坏或凹陷该如何处理呢?

As people's living standards continue to improve. The demand for copper doors is constantly increasing, with reliable practical performance, beautiful appearance, and strong compression ability. So what should be done if the copper door is damaged or dented?

  铜门的保养非常重要,要保持外漆的完整性,防止磕碰、下垂的问题。需要注意铜门的维护,选择正确的方法,经常做好铜门清洁保养工作,可以减少其氧化时间,提高铜门的使用寿命。

The maintenance of copper doors is very important. It is important to maintain the integrity of the outer paint to prevent problems such as bumps and sagging. It is necessary to pay attention to the maintenance of copper doors, choose the correct method, and regularly clean and maintain copper doors, which can reduce their oxidation time and improve their service life.

  在薄金属板的铜门出现损坏,或凹陷的时候可以用真空机的负压吸去凹痕。不同类型的铜板还原方法不同。中间是空的,把中空的部分放进去,用一个强磁铁外部用弱磁线引导,使强磁铁向凹陷区域,然后外部用高强度的电磁吸引,可以提起厚度约为1mm的铜凹陷,如果厚度较高,用其他方法。

When the copper door of the thin metal plate is damaged or dented, the negative pressure of the vacuum machine can be used to remove the dents. Different types of copper plates have different reduction methods. The middle is empty, put the hollow part inside, use a strong magnet to guide the outside with a weak magnetic wire, so that the strong magnet moves towards the concave area, and then use high-strength electromagnetic attraction to lift a copper concave with a thickness of about 1mm. If the thickness is higher, use other methods.

20230301095141499.png

  在铜门弧垂焊接时,以多个铜门分支为受力点,用液压或改变轮对组进行强力牵引,铜板凹陷即可抬起。用砂轮打磨整平修复后的凹痕。带有弧线或边缘的位置必须与门的整体图像一致。如果有焊接铜支管,应先打磨掉铜支管,然后再进一步打磨平整。

When welding the copper door sag, multiple branches of the copper door are used as the force points, and hydraulic pressure or changing the wheelset group is used for strong traction. The copper plate can be lifted when it is concave. Polish and level the repaired dents with a grinding wheel. The position with arcs or edges must be consistent with the overall image of the door. If there is a welded copper branch pipe, the copper branch pipe should be polished off first, and then further polished flat.

以上就是有关:山东铜门的介绍,想了解更多的内容请点击://www.doveish.com我们将会全心全意为您提供满分服务,欢迎您的来电!

The above is an introduction to Shandong Tongmen. To learn more, please click: //www.doveish.com We will wholeheartedly provide you with full score service. Welcome to call us!

新闻资讯
-News and information-
在线客服
二维码

扫描二维码

Baidu
map